RX200 S3 Operating Manual 55
Startup and Operation Configuring the Server
5.3 Configuring the Server
This section contains information about configuring the server and installing the
operating system.
I Make sure that the energy saving functions are disabled in the BIOS Setup
during server operation.
5.3.1 Configuration with ServerStart
Configuring IME (RAID Level 1)
The server has an onboard SAS controller with "Integrated Mirroring Enhanced"
functionality. Configure IME before you begin with ServerStart.
I To configure "Integrated Mirroring Enhanced", the controller has its own
RAIDSelect Utility. For further information, refer to the “Integrated
Mirroring User’s Guide” on the ServerBooks CD (select “Controllers” from
the menu).
The ServerStart CD supplied allows you to conveniently configure the server and
install the operating system. The menu-guided configuration includes server
configuration with the SCU and RAID configuration with the GAM (Global Array
Manager).
I Descriptions of operating systems not covered in the RAID controller
manual are provided in the appropriate readme files on the driver
diskettes.
Details of how to operate ServerStart and further information can be found in the
"PRIMERGY ServerView Suite - ServerStart" user manual (see “Literature” on
page 89).
If you are using ServerStart, you can skip the following section on how to
configure the server and install the operating system.
To Next Page
Loading...
Need help?
General
