RX200 S3 Operating Manual 15
2 Installation Steps: Overview
This chapter contains an overview of the steps necessary to install your server.
Links guide you to sections where you can find more detailed information on the
individual steps:
Ê At first, please take notice of the safety instructions in chapter “Important
Information” on page 17 and following.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the delivery agrees with the details in the
delivery note (see section “Unpacking the Server” on page 30).
Ê The server includes loose parts. Keep these parts in a safe place. They are
designed to be used for installing optional components at a later time.
Ê Transport the server to the place where you want to install it
Ê Make sure that all necessary manuals (see “Additional server documen-
tation” on page 6) are available; print out the PDF files if required.
Ê Mounting the server into the rack (see section “Installing/Removing the
Server in/from the Rack” on page 31).
Ê Wire the server. Please take note of the section “Connecting Devices to the
Server” on page 41 and the section “Instructions for Connecting/Discon-
necting Cables” on page 44.
Ê Connect the system to the line voltage (see section “Connecting the Server
to the Mains” on page 43).
Ê Make yourself familiar with the operating and indicator elements on the front
and on the rear side of the server (see section “Controls and Displays” on
page 45).
To Next Page
Loading...
Need help?
General
