Fujitsu PRIMERGY RX200 S3 User Manual

6 Operating Manual RX200 S3
Documentation Overview Introduction
Additional server documentation
The PRIMERGY RX200 S3 documentation consists of the following additional
manuals:
– “Safety” manual (print version delivered together with the system, PDF file
available on the ServerBooks CD)
– “Warranty” manual (print version delivered together with the system, PDF file
available on the ServerBooks CD)
– Technical Manual for the D2300 system board (PDF file available on the
ServerBooks CD)
– “BIOS Setup” (PDF file available on the ServerBooks CD)
– “PRIMERGY ServerView Suite - ServerStart” (PDF file available on the
ServerBooks CD)
– “PRIMERGY RX200 S3 Options Guide” (PDF file available on the
ServerBooks CD)
– “Global Array Manager Client Software User’s Guide” (PDF file available on
the ServerBooks CD)
– “Global Array Manager Server Software User’s Guide” (PDF file available on
the ServerBooks CD)
– “Integrated Mirroring User’s Guide” (PDF file available on the supplied
ServerBooks CD)
I If you need a replacement copy of the ServerBooks CD send the details of
your server to the following e-mail address:
Reklamat-PC-LOG@fujitsu-siemens.com
Further sources of information:
– Technical manual for the corresponding rack
– Manual for the monitor
– Manual for ServerView server management
– Manual for the remote testing and diagnostic system RemoteView
– Documentation for the boards and drives
– Operating system documentation
– Information files in your operating system
(see also “Literature” on page 89).

Fujitsu PRIMERGY RX200 S3 Specifications

General

Number of Processors	2
Storage	Up to 6 x 3.5" SAS/SATA HDD
RAID Support	RAID 0, 1
Network	Dual Gigabit Ethernet
Form Factor	1U Rack
Power Supply	Hot-plug redundant power supply