Fujitsu PRIMERGY RX200 S3 - Indicator on Hot Plug Power Supply Unit

RX200 S3 Operating Manual 51
Startup and Operation Controls and Displays
5.1.4 Indicator on hot plug power supply unit
Figure 15: Indicator on hot plug power supply unit
1 Indicator on hot plug power supply unit (three colors)
Does not light up if no mains voltage is present.
Lights orange when the server is switched OFF, but mains voltage is
present (standby mode).
Lights up green when the server is switched on and functioning
properly.
Lights up red or does not light up if the power supply unit has failed.
1
1