56 Operating Manual RX200 S3
Configuring the Server Startup and Operation
5.3.2 Configuration without ServerStart
Configuring IME (RAID Levels 0, 1)
The server has an onboard SAS controller with "Integrated Mirroring Enhanced"
functionality.
I To configure "Integrated Mirroring Enhanced", the controller has its own
RAIDSelect Utility. For further information, refer to the “Integrated
Mirroring User’s Guide” on the ServerBooks CD (select “Controllers” from
the menu).
Configuring the Onboard SAS Controller with RAID functionality
You will find a description of the onboard SAS controller configuration in the
Technical Manual for the system board (see “Literature” on page 89).
The RAID functionality is configured using the GAM (Global Array Manager)
(see “Literature” on page 89).
Configuring the PCI RAID Controller
If your server is fitted with a PCI RAID controller, you must configure it as
described in the related documentation.
Operating system installation
Ê Insert the installation floppy disk and the CD for the operating system you
want to install in the corresponding drive.
Ê Reboot the server.
Ê Follow the instructions on screen and in the manual for the operating
system.
If your server is equipped with a RAID controller, please read how to install the
desired operating system in the related manual.
To Next Page
Loading...
Need help?
General
