EasyManua.ls Logo

Fujitsu PRIMERGY RX200 S3 - Page 9

Fujitsu PRIMERGY RX200 S3
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RX200 S3 Operating Manual 9
Introduction Features
The PDA (Prefailure Detection and Analyzing) technology from Fujitsu Siemens
Computers analyzes and monitors all components that are critical for system
reliability.
Optional RAID controllers support RAID Levels 0, 1 and 5 and increase system
availability.
Server management
Server management is implemented using the ServerView software supplied
combined with PDA (Prefailure Detection and Analyzing) technology from
Fujitsu Siemens. PDA reports the threat of a system error or overload at an early
stage, allowing preventive measures to be taken.
ServerView enables the management of all PRIMERGY servers in the network
via a central console. The following key features are supported among others
by ServerView in this context.
Remote power on (Wake On LAN)
Temperature monitoring of the CPU and the surrounding area
Monitoring of the utilization of the PCI buses
Detailed status and error reports for bus systems, processors and main
memory
Watchdog timer for Automatic Server Reconfiguration and Restart (ASR&R)
in the event of failure of memory modules or processors
Power monitoring
Early detection of a defective fan
Watchdog timer for operating system monitoring and application monitoring
with ASR&R
Further information about ServerView server management is provided in the
associated documentation (see “Literature” on page 89).
ServerStart
The ServerStart software supplied allows you to configure your PRIMERGY
server quickly and purposefully. User-guided menus are available for installing
the server operating system (for further details see section “Configuring the
Server” on page 55).

Table of Contents

Other manuals for Fujitsu PRIMERGY RX200 S3

Related product manuals