50 Operating manual RX300 S3
Operating and Indicator Elements Preparation for Use and Operation
Figure 13: The front side
Indicators on the control panel
ID Identification (ID) button
The ID indicators on the front and on the rear of the server lights up
(blue) when the ID button is pressed. The two ID indicators are
synchronized.
1 HDD BUSY indicator 7 Drive access indicator
2 HDD FAULT indicator 8 Global Error indicator
3 Floppy disk drive indicator 9 ON/OFF button
4 ID indicator 10 NMI button
5 ID button 11 Reset button
6 Power-on indicator 12 CD-ROM-/DVD-ROM indicator
Power-on indicator (bicolor)
Lights orange when the server is switched OFF, but mains voltage
is present (standby mode).
Lights green when the server is switched ON.
!
!
To Next Page
Loading...
