RX300 S3 Operating manual 51
Preparation for Use and Operation Operating and Indicator Elements
Indicators on the drives
CD-/DVD-ROM indicator
Lights green when the storage medium is being accessed.
Floppy disk drive indicator
Lights green when the storage medium is being accessed.
Drive access indicator (green)
An internal SAS drive (HDD) is being accessed.
Global Error indicator
Does not light when the system is ok. No service incident or
critical event has occurred.
Lights orange when a prefailure event has been recognized.
Users can check system- and eventlog or via ServerView for event
details.
Flashes orange when a critical event has occurred. Users can
check BIOS Setup, system- and eventlog or via ServerView for
event details.
If the event is still acute after a power failure, the indicator is
activated after the restart.
ID ID indicator (blue)
Lights blue when the system has been selected by pressing the
ID button. To deactivate, press the button again.
The ID indicator can also be activated via ServerView and its status
reported to ServerView.
!
To Next Page
Loading...
