EasyManuals Logo

Fujitsu PRIMERGY TX150 S6 Options Guide

Fujitsu PRIMERGY TX150 S6
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
TX150 S6 Options Guide 9
Preface Expansions and conversions
1.3 Expansions and conversions
Main memory expansion
The system board supports up to 16 Gbyte main memory. 4 slots (2 memory
banks with 2 slots each) are provided for the main memory. Each memory bank
can be populated with 512 Mbyte, 1 Gbyte, 2 Gbyte or 4 Gbyte unbuffered
DDR2 memory modules.
Accessible drives
Three 5.25-inch bays are available for accessible drives. In these bays you can
install a DVD/DVD-RW drives, magnetic tape drives, a multibay (slimline DVD
and FDD/ServerView Local Service Panel) or a hard disks extension box (only
SAS base units). Below the 5.25-inch bays for accessible drives you will find
also a bay for a 3.5-inch floppy disk drive.
Hard disks extension box
In the SAS base units two 5.25-inch bays for accessible drives can be used to
install a hard disks extension box.
Two variants of the hard disks extension box are available:
Variant 1:
one bay for a ServerView Local Service Panel, one bay for a slimline DVD
drive and two bays for 3.5“ hard disks
Variant 2 (special release required):
eight bays for 2.5“ hard disks
ServerView Local Service Panel
The system board supports the CSS (Customer Self Service) functionality
(description see the operating manual). You can install a ServerView Local
Service Panel for an easier identification of the defective components.

Other manuals for Fujitsu PRIMERGY TX150 S6

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY TX150 S6 and is the answer not in the manual?

Fujitsu PRIMERGY TX150 S6 Specifications

General IconGeneral
BrandFujitsu
ModelPRIMERGY TX150 S6
CategoryServer
LanguageEnglish

Related product manuals