Fujitsu PRIMERGY TX150 S6

60 Options Guide TX150 S6
PCI slot assembly Expansion cards in the PCI slots
8.2 PCI slot assembly
Slot 5 (PCIe) is the default slot for the boot controller. If the boot controller
should be operated in an other PCIe slot, it is necessary to set the PCI scan for
this slot to "enabled" and the PCI scan for slot 5 to "disabled" in the BIOS.
The controllers LSI MegaRAID SAS 8308ELP and LSI MegaRAID SAS
8344ELP are released only for slot 6.
Otherwise install PCI cards in the PCI slots 1-3 and PCIe cards in the PCIe slots
4-6.