First-time setup of you r device
First-time setup of your devic
e
First- time setu pGettingstarted
Please read the chapter "Important notes", Page 12.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
Before you switch on the device for the first time, connect it to the ma ins v oltage
using the mains adapter, see "
Mains adapter connecting", Page 17 .Themains
adapter must be connected during the entire installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a s hort time or may flicker.
Please fo llow the instructions on the scree n.
NEVER switch off your device during the first-time setup process.
The battery must be charged if you w ant to operate your device usin g the battery.
When used on the move, the built-in battery provid es the device with the necessary power. You
can increase the operating time by using the available energy-saving fu nctions.
For instructions on how to connect external devices (e.g. m ouse, printer) to yo ur Tablet
PC, please refer to the operating manual for your device.
Unpacking and c
hecking the device
Should y ou discover a ny damage that occurred during transportation,
notify your local sales outlet immediately!
► Unpack all the individual p arts.
PackagingTranspo rt
► Check your d
evice for any visible damage which may have occurred during transportation.
You may nee
d the packaging in the future, if you need to transport your device.
16 Fujitsu
To Next Page
Loading...
Need help?
General