First-time se tup of yo ur d evice
Selecting a location
SelectingalocationDeviceM ainsadapter
Select a suitable location for the device before setting it up. F ollow
the instructions below when doing so:
• Never place the device or the mains adapter on a heat-sensitive surface.
The s urface could be d amaged as a result.
• Never place the device on a soft surface (e.g. ca rpeting, upholstered furniture,
bed). This can block the air vents and cause overheating and damage.
• The u nderside of the device heats up during normal operation. Prolonged contact
with the skin may become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of th e device may ma rk certain types of delicate surfa ces.
• Keep other objects at least 100 mm away from the device and its
mains adapter to ensure adequate ventilation.
• Never cover the ventilation slots of the device.
• Do not expose the device to extreme environmental conditions. Protect
the device from dust, humidity, and heat.
Mains adapter connecting
Preparingf or operationMainsadapt er
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The supplied power cable conforms to the requirements of the co untry in
which you pu rchased yo ur device. Make sure that the power cable i s approved
for use in the country in which you intend to use it.
3
1
2
► Connect th e power cable (1) to the
mains a dapter.
► Plug the mains cable (2) into a mains outlet.
► Connect the mains adapter cable (3) to
the DC jack (DC IN) of the device.
Fujitsu 17
To Next Page
Loading...
Need help?
General