Working with the Tablet PC
Replacing the pen tip
With use, the pen tip may become worn or may pick up foreign particles that can scratch the screen.
A da maged or worn tip may not move f reely, causing unpredictable results when using the pen.
If your p en exhibits these problems, you shou ld replace the pen tip. To do this, use the supplied tool (1).
1
► To remove the tip, position it in the gap
between the two ends of the tool supplied.
► Pinch the two en ds of the supplied too l
together so that the tip is firmly clasped,
then pu ll it fro m the barrel.
► Replace the tip with one of the ne w tips
that were supplied with your pen. Insert
the flat end of the tip in to the barrel
and exerting gentle pressure, push it
in until it is firmly in place.
If the tip is worn or damaged, discard it.
Fujitsu 33
To Next Page
Loading...
Need help?
General