Troublesho ot ing and tips
Pen input not working
Cause
Troubleshooting
Incorrect driver installed.
► If your device is one which can only be
operated usin g the pen, install the driver for
the standard model.
or
► If your device is one which c
an be
operated using the pen and
by finger,
install the driver for the
"Dual D igitizer"
model.
The Tablet PC does not start after switch on
TheTabletPC
Cause Troubleshooting
The battery is not installed correctly.
► Check whethe r the battery is installed
correctly in its compartment.
► Switch on the Tablet PC.
The batte ry is dead.
► Charge the ba ttery
.
or
► Insert a charged battery.
or
► Connect the mains adapte r to the Tablet
PC.
The power adapter is not connected corre ctly.
► Check whether the mains adap ter is
connected correctly to the Tablet PC.
► Switch on the Tablet PC.
The Tablet P
Cstopsworking
TheTable
tPC
Energysa
vingm ode
Cause Troublesh o
oting
The Tablet PC is in energy saving mode.
► Leave ener
gy saving mode.
An application programme has caused the
malfunction.
► Close the application program or restart
the Tablet PC (by restarting the operating
system or sw itching the device off and back
on again).
The batte ry is dead.
► Charg e
the battery.
or
► Insert a charged battery.
or
► Connect the mains adapte r to the Tablet
PC.
Fujitsu 71