First-time setup of you r device
Switching on the device for the first time
Switchingonforthefirst time
On devices with ON/O FF switch for wireless components: Slide the ON/OFF switch
for wireless components to the ON position before switching on the device.
When you switch on the device for the first time, the supplied software i s
installed and configure d. Because this procedure m ust not be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NO T restart the device unless
you are requested to do so!
To make it easier to use y
our device for the first time, the operating system
is p re-installed on th
e hard disk.
1
2
► Slide th e ON/OFF switch (1) to the right to switch on the Tablet PC.
The ON
/OFF switch returns automatically to its original position.
The power-on indicator (2) lights up whenever the system is switched on.
► During installation, follow the instructions on screen.
18 Fujitsu
To Next Page
Loading...
Need help?
General