Working with the Tablet PC
Using the stylus pen
1
2
3
1 = pen tip
2 = pen b uttons
3 = eyelet for pe n cord
You c an use the pen on your Tablet PC as an electronic writing implement to select items, and to
navigate through programs on it. Programs that support handwriting recognition a lso allow you to
write characters directly on the screen with the pen . You can also use the p en as a drawing tool.
The Tablet PC is supplied with a pen cord which you can attach to the eye lets
on the pen and on the Tablet PC.
Use only the pen provided with your Tablet PC. Do not use s ubstitutes that
were not designed for your Tablet PC. Replace the stylus tip if it is wo rn.
The warranty does no t cover a scratched screen.
While writing, you should take care not to scratch the surface of the
display (e.g. with a wristwatch or bracelet).
The Tablet PC’s pen is an electronic instrument that can be dam aged if
used improperly. Handle the pen with care.
The following list contains guidelines for proper pen handling:
• Do n ot gesture with the pen.
• Do not use the pen as a pointer.
• Do not use the pen on surfaces other than the screen of the Tablet PC.
• Do not try to turn the thumb grip on the pen. The thumb grip is used to
place the pen in its slot and to take it out of the slot.
• Never store the pen with the tip bearing the weight of the pen (e.g. with the tip down
in a pen holder). If the pen is stored with the tip pointing down, this may have
an adverse effect on the pen mechanism (particularly under high temperatu res).
In this case the pen tip may react as thou gh it is constantly being pressed down.
To avoid dam age, the pen should be stored in the pen slot when not in u se.
Thepencanbeinfluenced by electrom agnetic fields (cursor quivers or
jumps). There may be a few areas on the screen w here the curso r quivers
slightly in spite of pressing t he pen down firmly.
Fujitsu 31
To Next Page
Loading...
Need help?
General