Connecting external devices
Connecting external devices
Under all circumstances, please observe the safety notes provided in the
"
Important n otes", Page 12 ch apter before connecting or disconn ecting
any devices to or from your Tablet PC.
Always read the documentation supplied with the device you wish to connect.
Never connect or disconnect c ables during a thunderstorm.
Never pull at a cable when disconnecting it. A lways grasp the plug.
Adhere to the order described below whe n you connect external devices
to the Tablet P C or separate them from it:
With some devices, such as USB devices, it is not necessary to switch off
the Tablet PC and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation s upplied with the external device.
Some of the external devices re quire special drivers (see the operating
system and external device docume ntation).
Connecting devices to the Tablet PC (or to the cradle).
1. Switch off the Table t PC and all external devices.
2. Remove the mai
ns plug for the Tablet PC and all relevant devices from the sockets.
3. Connect the cab les for your external devices following the instructions.
4. Plug all powe
r cables into the m a ins sockets.
DevicesPerip heralde
vices
Disconnectin g devices from the Tablet PC (or from the cradle)
1. Switch off the Table t PC and all external devices.
2. Remove the
mains plug for the Tablet PC and all relevant devices from the sockets.
3. Disconnect the cables for your externa l devices following the instructions.
DevicesPerip heraldevices
Fujitsu 61
To Next Page
Loading...
Need help?
General