3. INITIAL SETTINGS
3-2
3.2 How to Select Radar Purpose
1. Press the MENU/ESC key to show the menu.
2. Press , on the Cursorpad to select [Factory], then press the ENTER key.
3. Press , on the Cursorpad to select [Usage], then press the ENTER key.
4. Press , on the Cursorpad to select a [River] or [Sea], then press the ENTER
key.
5. Press the MENU/ESC key to close the menu.
3.3 Initial Settings
1. Press the MENU/ESC key to show the menu.
2. Press , on the Cursorpad to select [Installation], then press the ENTER key.
3. While holding down and pressing the ENTER key, press the ALARM key five
times to unlock the [Installation] menu.
4. Press , on the Cursorpad to select the item to set, then press the ENTER key.
5. Press , on the Cursorpad to select the option required, then press the ENTER
key
6. After setting all items, press the MENU/ESC key to close the menu.
To Next Page
Loading...
