5. OPERATION
5-24
3. Use the Cursorpad ( or ) to select [Panel Buzzer] (or [External Buzzer] for op-
tional buzzer) and press the ENTER key.
Panel Buzzer and External Buzzer options
4. Use the Cursorpad ( or ) to select [On] or [Off] then press the ENTER key.
5. Press the MENU/ESC key to close the menu.
5.19 How to Off-center the Display
You can off-center your ship position to expand the view field without selecting a larger
range scale. The display can be off-centered manually, or automatically according to
speed of the ship.
Note: Off-centering is not available in the true motion mode.
5.19.1 How to select the off-center mode
1. Press the MENU/ESC key to open the menu.
2. Use the Cursorpad ( or ) to select [Display] and press the ENTER key.
3. Use the Cursorpad ( or ) to select [Off-center mode] and press the ENTER
key.
4. Use the Cursorpad ( or ) to select [Manual], [Custom] or [Auto] then press the
ENTER key. Press the ENTER key to change between on and off.
5. After setting all options, use the Cursorpad () to select [EXIT? YES] and press
the ENTER key.
6. Press the MENU/ESC key to close the menu.
Press the ENTER key
to change between
on and off.
To Next Page
Loading...
