1. INITIAL SETTINGS AND ADJUSTMENTS
1-9
1.2.6 [Ship Name] window
1. Access the [Common Installation Setting] menu and click [Basic Setting] on the
tab bar.
2. Click [Ship Name] on the menu bar.
3. Enter your ship information. The data entered here is included in any printing.
Note: The FMD-3100 can display own ship’s data input from AIS, on the [Own
Ship] page in the [Nav Status] menu. The data entered here is not reflected to the
AIS data.
4. Click [Save] on the info bar. Several confirmation messages appear. Click [OK] to
reboot the system. To discard all changes, click [Discard Changes].
1.2.7 [ECDIS/Radar] window
[Ship Name]: Own ship’s name. [Call Sign]: Own ship’s call sign
[IMO No.]: Own ship’s IMO no. [MMSI]: Own ship’s ID
Item Description
[Calculate CPA/TCPA] Setting cannot be changed. Keep “unchecked.”
[Use Legacy TTM ID] Sets the behavior when the TTM sentence contains "ID = 0".
Set according to the range of TTM ID of the connected de-
vice.
Note 1: “N/A” means setting has no influence on system.
Note 2: There is no problem if item is “checked” when a FU-
RUNO radar is used.
Radar
manufacturer
TTM ID
Setting range
Recommended
setting
FURUNO
Other
00~99
01~200
00~99
01~99
00~999
01~999
Checked
N/A
Checked
N/A
Unchecked
N/A
To Next Page
Loading...
