Furuno FMD-3100 - How to Change the Color of Data in the Sensor Information Box According to Integrity

1. INITIAL SETTINGS AND ADJUSTMENTS
1-82
1.18 How to Change the Color of Data in the Sensor
Information Box According to Integrity
The following procedure shows how to change the color of the data in the sensor in-
formation box with the results of the Integrity Check. For the Integrity Check, see the
Operator’s Manual for the Chart Radar.
1. Press Ctrl, Shift and t keys simultaneously on the control unit or keyboard. The
password input dialog box appears.
2. Enter the password and click the [OK] button.
Note: The service mode remains enabled until you press Ctrl, Shift and t keys
simultaneously or reboot the unit.
3. Click [MENU] to open the menu.
4. Click [Ship & Route Parameters], then click the [Function2] tab.
5. Check the checkbox of [Color of own ship’s information (TEXT) will be changed
by result of integrity check].
6. Click the [Save] button to save the configuration.