FUTABA T18MZ - Page 98

98
<Linkage Menu>
Procedure for changing the slot No. of each sensor unit
1.Select[Sensor]onpage2oftheLinkageMenu.
2.Callpage2bypressing[1/2]andpress[ChangeSlot].
3.ConnectthereceiverbatteryandthesensorunittotheS.I/F
connectorbehindtherearcoverofthetransmitterusinga3-way
hubor2-waycord.
4.Pressthe[Read]key.ThecurrentslotNo.isdisplayed.
5.Whenanumberispressed,the[ △ ],[ ▽ ],[ △△ ]and[ ▽▽ ]
keysappear.NowchangethedesiredNo.
6.Whenthe[Write]keyispressed,thedesiredNo.iswrittentothe
sensor







Sensor
HUB
orY-adapter
Receiverbattery
T18MZ