Garmin G1000 System Maintenance Manual

Page 7-60 G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air
Revision 4 190-00716-01
7.31 Search and Rescue Functional Check
1. On the MFD, press the “FPL” key to display the Active Flight Plan Menu.
2. Press the “MENU” key to display the PAGE MENU Options.
3. Scroll through the choices with the FMS knob and select “Search and Rescue”.
4. Press “ENT” key to complete the selection and view the SAR flight plan menus.
5. From the Search and Rescue Menu, turn the large and small FMS knobs to enter the starting
waypoint.
6. Press ENT key to complete the selection and move to the next option, “PATTERN” type.
7. Use the FMS knob to move to the PATTERN type and select “PARALLEL”.
8. With the FMS knob scroll through the options and change the fields as desired, or leave the
default entries.
9. Press ENT key with the “ACTIVATE SAR?” field highlighted, to complete and activate the
flight plan.
10. Verify the parallel track search pattern is on the Navigation Map page.
If no other service is to be performed, continue to the return-to-service checks in Section 8.

Garmin G1000 Specifications

General

Display Type	LCD
Primary Flight Display (PFD)	Yes
Multi-Function Display (MFD)	Yes
Terrain Awareness	Yes
Autopilot Integration	Yes
Integrated Flight Deck System	Yes
Weather Radar	Optional
Traffic Advisory System (TAS)	Optional
Terrain Awareness and Warning System (TAWS)	Yes
Resolution	1024 x 768 pixels
Weather Data	Yes
Navigation	Yes
AHRS	Yes
Air Data Computer (ADC)	Yes
Interfaces	ARINC 429, RS-232
Certification	TSO certified
Traffic Information	Optional (requires ADS-B or TCAS)