Garmin GPSMAP 396 - Creating a Direct To; Navigating to an Airport or Navaid

14 GPSMAP 396 Owner’s Manual
bAsIc oPerAtIon In AvIAtIon Mode > creAtIng A dIrect to
Creating a Direct To
In Aviation Mode, press Direct To to select a destination. When
a Go To or route is currently in use, holding Direct To down
briey shows a detailed information page for the current destination.
In Marine or Automotive Mode, pressing Direct To shows the
Navigate menu, which allows you to start navigation or edit a route.
Also, in Marine Mode, pressing Direct To twice creates a MOB
waypoint and starts navigating to that point.
Press MENU on any tab of the Go To Page to open an options menu
for that tab. Based on the tab you selected, you can Show Details,
Select Approach, Select Route, Find Land Points, and Remove
Point.
Go To Page: Aviation Tab
Airport
identier
Facility
name
City
To go to an airport or navaid:
1. Press Direct To to show the Go To Page. Use the
ROCKER to show the Aviation tab.
2. Press up or down on the ROCKER to select the identier,
facility name, or city eld, and press ENTER.
3. Use the ROCKER to enter the word to search for. Press up
and down to change the highlighted character and right to
move to the next character eld. As you scroll through the
characters the GPSMAP 396 shows database entries with the
same characters you have entered to that point. If more than
one entry exists in the database for the characters you have
entered, a window appears. Use ENTER and the ROCKER to
select the point.
4. Press ENTER when the point is shown.
5. With the on-screen Go To button highlighted, press ENTER.
The GPSMAP 396 creates a course from your present
location to the selected destination.