56 GPSMAP 396 Owner’s Manual
bAsIc oPerAtIon In AutoMotIve Mode > nAvIgAtIng In AutoMotIve Mode
To start new route using the Find Menu:
1. Press Direct To to open the Navigate menu.
2. Highlight New Route (or Go To Point when in Marine Mode),
and press ENTER to open the Find Menu.
3. From the Find Menu, highlight Waypoints, and press ENTER.
(You can also choose to go to other points, such as Cities or
Services from this list. The steps vary only slightly from those
listed for Waypoints.)
4. Select a waypoint from the list, and then press ENTER to
show the Waypoint Page.
Waypoint Page
Activating a Go To using the Find Menu
5. The Waypoint Page automatically opens. With the Go To
button highlighted, press ENTER to begin navigation.
To search for an item and route to it:
1. Press NRST/FIND to open the Find Menu.
2. Using the ROCKER, highlight a category, such as Cities, and
press ENTER.
3. Press ENTER and use the ROCKER to begin entering the
letters contained in the item name. The list begins to sort
by the items that contain the letters you are entering. Press
ENTER.
Finding an item using the Containing eld: The unit searches for items
containing the letter combination you enter and shows them in the list.
4. Highlight an item from the list, and press ENTER.
5. Highlight the Go To button, and press ENTER.
For complete information about nding an item, refer to page 57.
To Next Page
Loading...
