JF-240UV User Manual
73
Dividing a Job into Uniform Rows and Columns of Tiles
1. Check the or fields to tile the job vertically or horizontally into evenly divided columns
or rows
2. Set the fields to the desired width for the tiles.
3. Set the fields to the desired height for the tiles.
4. Set the amount of overlap between the tiles in the field
Dividing a Job into Uniform Tiles of a Specified Size
1. Check the and fields to set all tiles in the job to be of the specified size.
2. Set the and fields to the width and height desired for the tiles.
3. Set the amount of overlap between the tiles in the field.
* If the specified tiles do not cover the job evenly, the tiles at the top and right edges are made
small enough to fit in the gap.
To Next Page
Loading...
