GDC SX-3000 - Increase Rebuild Speed

5. ADMIN PANEL
April 20, 2015
SX-3000 Standalone Integrated Media Block™ with
Portable Storage/ Enterprise Storage User Manual
- 121 -
Figure 93 Shows information on storage performance of the selected hard disk.
3
A new window showing information on hard disk performance appears as seen in Figure 93 .
Press
Save output to USB to save this information to a USB disk.
Press
Back to return to Storage System Management menu.
5.3.1.6. Increase Rebuild Speed
Figure 94 Storage System Management [Increase Rebuild Speed].
1
If the RAID array is being rebuilt during playback, the rebuild speed will slow down significantly. To
resume highest rebuild speed after playback is finished, go to
Admin Panel Login  Click
Storage System Management
menu  Click Increase Rebuild Speed button (please refer to
Figure 91). This will immediately set RAID array to rebuild at highest speed.
1
3