SX-3000 Standalone Integrated Media Block™ with
Portable Storage/ Enterprise Storage User Manual
Select the source of data you want to ingest content from and click
Open
.
Please refer to
Section 4.4 Source Management to configure the source of data.
Browse the source and select the directory where the package is located. The list of packages
in the directory will be displayed in the top right section of the screen.
Click
View CPL to display the list of CPLs available in the packages. You can use this button to
toggle between the package list and CPL list displayed in the top right section of the screen.
Click under the
Transfer column to select the package or CPL you wish to download. A green
check
indicates a selected package or CPL. You can select multiple packages or CPLs.
Information about the selected package or CPL, including the file size, is shown in the section
below the package or CPL list.
Press
Import to queue downloading of the package or CPL. (To bypass ingestion for direct
playback you can press
Live Play instead. Refer to Live Play below for more info.)
When done selecting the package(s), click the
Close button.
IMPORTANT: Always press Close after you are done starting the download of content. You
can monitor the progress of ingest by pressing the
Status button. Please refer to Section 4.2.4.
Monitor Ingest Progress
for more information about Status
.
Live Play can be used instead of Import in order to bypass content ingestion and play directly
back from network source. This is not supported through USB but can be used for direct
playback through network source (provided the network source has sufficient bandwidth to
stream the content).
IMPORTANT: You should always use Import whenever possible.
When you press the
Live Source button you can view all clips currently mounted and available
through the
Live Play feature. You can detach Live Play sources through this interface as well.
You should always detach live play sources whenever you are done using them via
Live Play
.
To Next Page
Loading...
