GE 90*-30 PLC Series Installation And Hardware Manual

Cables
GFK-0356Q Chapter 10 Cables 10-3
10
Series 90-30 Cable Cross-Reference
Catalog No. Description Applications
IC693CBL305 Wye cable for splitting out two serial
port connections from one module
connector. (Use cable IC693CBL304
with the IC693PCM300 module.)
For use with the following modules:
IC693PCM301
IC693PCM311
IC693CMM311
IC693ADC311
AD693CMM301
IC693SLP300
IC693CBL306 3’ (1 meter) extension cable connects
between the 50-pin connector on the
module faceplate and the connector on
the terminal block.
For High Density (32-point) I/O
modules having a single 50-pin
connector:
IC693MDL652
IC693MDL653
IC693MDL750
IC693MDL751
IC693CBL307 6’ (2 meter) extension cable connects
between the 50-pin connector on the
module faceplate and the connector on
the terminal block.
For High Density (32-point) I/O
modules having a single 50-pin
connector:
IC693MDL652
IC693MDL653
IC693MDL750
IC693MDL751
IC693CBL308 3’ (1 meter) I/O cable connects to the
50-pin connector on the module
faceplate. The other end has stripped,
tinned, and labeled leads.
For High Density (32-point) I/O
modules having a single 50-pin
connector:
IC693MDL652
IC693MDL653
IC693MDL750
IC693MDL751
IC693CBL309 6’ (2 meter) I/O cable connects to the
50-pin connector on the module
faceplate. The other end has stripped,
tinned, and labeled leads.
For High Density (32-point) I/O
modules having a single 50-pin
connector:
IC693MDL652
IC693MDL653
IC693MDL750
IC693MDL751
IC693CBL310
(Obsolete. Use
IC693CBL327 and
IC693CBL328)
10’ (3 meter) I/O cable connects to one
of the 24-pin connectors on the module.
The other end has stripped, tinned, and
labeled leads.
Two cables are required per module.
For High Density (32-point) I/O
modules having dual 24-pin connectors:
IC693MDL654
IC693MDL655
IC693MDL752
IC693MDL753
IC693CBL311 10’ (3 meter) APM I/O cable connects
between one of the 24-pin connectors on
the module and the connector on the
terminal block.
Two cables are required per module.
APM modules:
IC693APU301
IC693APU302
IC693CBL312 0.5’ (152 mm) I/O expansion cable
interconnects baseplate expansion ports.
This is a Wye type cable for daisy-
chaining baseplates.
To interconnect CPU, expansion, and
remote baseplates.
IC693CBL313 26’ (8 meter) I/O expansion cable
interconnects baseplate expansion ports.
This is a Wye type cable for daisy-
chaining baseplates.
To interconnect CPU, expansion, and
remote baseplates.

GE 90*-30 PLC Series Specifications

General

Brand	GE
Model	90*-30 PLC Series
Category	Computer Hardware
Language	English