6.1.1.
Place Markers on an Image
The markers object bar includes a directional arrow and L (Left), R (Right), A (Anterior), P (Posterior) H (Head)
and F (Foot) markers.
1. Select a button in the object bar to select a marker. The marker is displayed on both the left and right
monitors.
2. To position a marker, select the marker displayed on the right monitor image, and drag it into
position.
3. To add additional markers, repeat steps one and two. You can add up to five arrows and up to two for
each type patient orientation maker per image.
To delete a marker: select it on the right monitor and press “Delete” button on the screen.
To save a copy of the image with the markers: press the “Save” key on the
Workstation
membrane keyboard.
4. Select the “Exit” button to close the Annotation screen. The annotated image remains displayed on the
left monitor until you press an X-Ray switch or recall a saved image.
To Next Page
Loading...
