6.1.2.
Add Comments to an Image
1. Select the “Comment” button on the Image Annotation screen. The comment box is displayed on
both the left and right monitors.
2. Enter text in the comment box. You can enter up to 80 characters.
3. To position the comment box on the image, select the border line of the comment box on the right
monitor and drag it.
4. To add additional comments, select the “Comment” button and enter another comment. You can
enter up to five comments per image.
To delete a comment: select it and press “Delete” button on the screen.
To save a copy of the image with the comment: press the “Save” key on the Workstation
membrane keyboard.
5. Select the “Exit” button to close the Annotation screen. The annotated image remains displayed on
the left monitor until you press an X-Ray switch or recall a saved image.
To Next Page
Loading...
