Local Network Setup
Click “Configure…” of local network to setup the local network.
Input the target IP Address, Gateway and subnet mask on the screen.
Fill in the information on this screen. You can obtain the correct information from your network
administrator. You don’t need to input IP, Gateway and subnet mask information when using DHCP.
Click ”OK” to return to Network & DICOM screen.
Input a target IP Address and click “Ping” button to verify the network connection. The results will show in
the text box.
Wireless Network Setup
Click “Configure…” of wireless network to setup the wireless network information.
Input a target IP Address and click “Ping” button to verify the network connection. The ping results will show
in the Result box.
Setup Worklist
The DICOM Worklist server, such as Radiology Information System (RIS), provides scheduled exams’
information.
To Next Page
Loading...
