4. Select the “Verify” button to verify that the server is connected. A verified successful message appears if
the server has connected. Select “OK” to close the screen.
5. Repeat steps three to four for each DICOM Worklist server on the network. You can edit or delete server
by clicking the relevant button.
6. When you have finished configuring all servers, select the “Exit” button to close the Worklist Screen.
Setup DICOM Printer
DICOM printer servers are network nodes that provide print functions in compliance with the DICOM
standard.
1. Select “DICOM Printers” from the Setup screen.
To Next Page
Loading...
