2. Select “Add” button.
Obtain the following information from the Network Administrator for your facility and enter it in the
text-entry fields on this screen:
Alias: Unique name, internal to the OEC WorkStation, used to identify the server in the list of available
destination devices.
AE Title: DICOM Application Entity Title.
IP Address: Unique IP address assigned to the server you are configuring.
Time Out: The time in seconds that the Workstation waits for a response from the server before
timing out.
Port Number: Port number assigned to the print device.
Maximum: Maximum print density.
Minimum: Minimum print density.
Config Info.: This value specifies the DICOM printer parameters. It is contained in the DICOM Printer's
Conformance Statement file. The DICOM tag is (2010, 0150) Configuration Information.
3. Select the “Border Density...” button and choose the image border density. The available options are:
• BLACK
• WHITE
To Next Page
Loading...
