GE Brivo OEC 715 - Page 126

Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product
Page 6-19
2. Select the “Add” button to add storage server you want to configure.
3. Obtain the following storage information from your network administrator and enter it:
Alias: Unique name, internal to WorkStation, used to identify the server in the list of available destination
devices.
AE Title: DICOM Application Entity Title.
IP Address: Unique IP address assigned to the server you are configuring.
Port Number: Port number assigned to the storage device.
Time Out: The time in seconds that the Workstation waits for a response from the server before timing out.
Overlay: Choose Nerver Send or Always Send if Available.
Image: The Workstation supports the following modalities:
RF: X-Ray Radio Fluoroscopic Image Storage. Default option. 1000 x 1000 pixel, static.
XA: X-Ray Angiographic Image Storage. 1000 x 1000 pixel, static.
CR: Computed radiography image storage. 1000 x 1000 pixel, static.
SC: Secondary Capture Image Storage, screen capture type image with Annotation and markers.
1000 x 1000 pixel, static.