GE MEDICAL SYSTEMS
DIRECTION 2300000, REVISION 2 LOGIQ™5 SERVICE MANUAL
8-48 Section 8-5 - Covers
8-5-5-4 Removal Procedure (cont’d)
5.) Unscrew four screws (3-6) from the bottom of the Top cover. Refer to Figure 8-53.
6.) Perform the following functional tests. If all are successful, include the debrief script provided below.
8-5-5-5 Mounting procedure
Install the new parts in the reverse order of removal.
Figure 8-53 Unscrew 4 screws from the bottom
Table 8-24 Functional Tests
Service Manual
Section
Functional Test / Diagnostic Test Debrief Script
Section 4-3-1
Power On/Boot Up
“Service Manual, Direction
2300000, Rev 1+, Section 8-5-5. Equipment
passed all required tests and is ready for use. “
Section 4-3-2
Power Off / Shutdown
Section 4-8-2
Cover Parts Function Validation
Section 10-5-5
Physical Inspection
(3)
(4)
(5)
(6)
To Next Page
Loading...
