GE MEDICAL SYSTEMS
DIRECTION 2300000, REVISION 2 LOGIQ™5 SERVICE MANUAL
8-68 Section 8-5 - Covers
8-5-16 Side Fringe
Purpose: This is a description on how to remove and replace the Side Fringe.
8-5-16-1 Tools
• Not required.
8-5-16-2 Needed Manpower
• 1 persons, 3 minute + travel
8-5-16-3 Preparations
8-5-16-4 Removal Procedure
1.) Remove the Left Cover. Refer to section 8-5-1 on page 39.
2.) Pull the Side Fringe upward from the Left Cover.
3.) Remove the Right Cover. Refer to Right Cover on section 8-5-2 on page 41.
4.) Pull the Side Fringe upward from the Right Cover. Refer to Figure 8-69.
Figure 8-69 Removing the Side Caps