GE MEDICAL SYSTEMS
D
IRECTION 2300000, REVISION 2 LOGIQ™5 SERVICE MANUAL
Chapter 8 Replacement Procedures 8-111
8-8-1-6 BEP Cable Connection With Console ( In case of change to BTO5 BEP3 FRU on BTO5 SYSTEM
) (cont’d)
10.)Connection COM1 Connector to Serial Port on BEP.
NOTE: COM1 Cable Connect to Motherboard Serial Port ( D-SUB 9 Pin Male )
11.)Connection Keyboard, Printer connector to USB Port on BEP.
Figure 1-117 COM1 cable connection
Figure 1-118 Keyboard, Printer connector
COM1 cable
USB Port
Keyboard
Printer
To Next Page
Loading...
Need help?
General
