GE LOGIQ 5

GE MEDICAL SYSTEMS
DIRECTION 2300000, REVISION 2 LOGIQ™5 SERVICE MANUAL
8-120 Section 8-8 - PC Block
Peripheral Configuration
Serial Port A [ AUTO ]
Parallel Port [ AUTO ]
Mode [ ECP ]
Audio [ Enable ]
LAN Device [ Enable ]
ASF Support [ Disabled ]
Device Configuration
ATA/IDE Configuration [ Enhanced ]
PCI IDE Bus Master [ Enhanced ]
Hard Disk Pre-Delay [ Disabled ]
SATA Port-0 [ Not detected ]
SATA Port-1 [ Not detected ]
PATA Primary Master [ HDS728080PLAT20 ] -- Current HDD
PATA Primary Slave [ Not detected ]
PATA Secondary Master [GCE-8526B] -- Current CDRW
PATA Secondary Slave [ Optional ] -- Optional MOD
Floppy Configuration
Diskette Controller [ Disabled ]
Event Log Configuration
Event Log [ Space available ] -- Not editable
View Event Log -- [Enter] Displays the event log
Event Logging [ Enable ]
Video Configuration
AGP Aperture Size [ 128 MB ]
Primary Video adapter [ AGP ]
Frame Buffer Size [ 16 MB ]