GE LOGIQ 5 Service Manual

GE MEDICAL SYSTEMS
D
IRECTION 2300000, REVISION 2 LOGIQ™5 SERVICE MANUAL
Chapter 4 Functional Checks 4-1
Chapter 4
Functional Checks
Section 4-1
Overview
4-1-1 Purpose of Chapter 4
This chapter provides procedures for quickly checking major functions of the LOGIQ™ 5 scanner
diagnostics by using the built-in service software, and power supply adjustments.\
Section 4-2
Required Equipment
• An empty (blank) CD-R Disk.
• At least one transducer. See “Probe/Connectors Usage” on page 4-12. for an overview.
(normally you should check all the transducers used on the system.)
Table 4-1 Contents in Chapter 4
Section Description Page Number
4-1 Overview 4-1
4-2 Required Equipment 4-1
4-3 General Procedure 4-2
4-4 Software Configuration Checks 4-21
4-5 Peripheral Checks 4-22
4-6 Monitor Function Checks 4-23
4-7 Keyboard Function Checks 4-25
4-8 Mechanical Function Checks 4-34
4-9 Board Function Checks 4-41
4-10 Site Log 4-55

GE LOGIQ 5 Specifications

General

Brand	GE
Model	LOGIQ 5
Category	Medical Equipment
Language	English