GE LOGIQ V2

LOGIQ V2/LOGIQ V1 – User Guide Index-3
Direction 5610736-100 Rev. 9
probe orientation, 5-3
safety, 5-6
using protective sheaths, 5-8
prudent use, 4-3
Q
QAnalysis, 2-45
Exit, 2-45
Quality Assurance, 3-53
baselines, 3-57
frequency of tests, 3-54
Introduction, 3-53
periodic checks, 3-57
phantoms, 3-55
record keeping, 3-68
system setup, 3-59
test descriptions, 3-59
typical tests, 3-54
R
Record keeping, 3-68
S
safety
electromagnetic compatiblity (EMC), 4-15
equipment, 4-10
hazards, 4-4, 4-10, 4-11, 4-12, 4-29, 5-6, 5-7,
5-8
biological, 5-16
smoke and fire, 4-11
labels, 4-32
patient, 4-6
acoustic output hazard
hazard, types
acoustic output, 4-9
electrical hazards, 4-8
mechanical hazards, 4-8
patient identification, 4-6
patient training, ALARA, 4-9
personnel, 4-10
precaution icons, defined, 4-3
precaution levels, defined, 4-3
probes, 5-6
handling precautions, 5-10
service, requesting, 3-73
site requirements, before the system arrives, 1-8
split-screen imaging, 1-35
System
acclimation time, 1-46
system
electrical configurations, 1-8
environmental requirements, 1-10
power down, 1-51
System cabinet, 3-39
T
TAMAX and TAMEAN, Doppler mode measurement
manual trace, 2-57
Time interval
Doppler mode measurement, 2-59
M-Mode measurement, 2-61
time interval and velocity, M-Mode measurements,
2-61
Tissue depth, M-Mode measurement, 2-60
Trace measurement, general, 2-51, 2-52, 2-53
Trackball, 3-41
U
Utility screens
connectivity, 3-29
V
Velocity, Doppler measurement, 2-56
W
Warning icon, defined, 4-3
Worksheet
changing data, 2-65
viewing, 2-63
Write Zoom, activating, 2-11