GE LOGIQ V2

Index-2 LOGIQ V2/LOGIQ V1 – User Guide
Direction 5610736-100
Rev. 9
E
Echo level measurement, 2-55
electrical
configurations, 1-8
electrical hazard, 4-10
electromagnetic compatiblity (EMC), 4-15
ellipse measurement, general, 2-50
EMC (electromagnetic compatiblity), 4-15
Environmental requirements
probes, 5-5
environmental requirements, 1-10
equipment safety, 4-10
exam
deleting, 1-78
explosion hazard, 4-11
EZBackup/Move, using, 3-16
F
Fast Key, 2-43
Federal law (USA), requirements, 1-6
Footswitch, 1-31
G
Gels, coupling, 5-15, 5-17
H
hazards, 5-16
biological, 5-8
electrical, 5-6
mechanical, 5-7
hazards, safety symbols, 4-4
hazards, types
biological, 4-11, 4-12
electrical, 4-8, 4-10
explosion, 4-11
mechanical, 4-8
I
images
deleting, 1-78
Indications for Use, 1-6
information, requesting, 3-73
K
keyboard
special keys, 1-33
L
labeling probes, 5-3
LOGIQ system
contraindications, 1-6
Indications for Use, 1-6
M
measurement controls, location, 2-47
M-Mode measurements, mode
time interval, 2-61
time interval and velocity, 2-61
tissue depth, 2-60
M-Mode, general measurements, 2-60
moving the system, 1-43
during transport, 1-44
precautions, 1-44
N
new patient
scanning, 1-62
O
Operator controls, 3-40
P
patient data
deleting, 1-78
patient list
entering, 1-68
patient safety, 4-6
peripherals
connector panel illustration, 1-23
Phantoms, 3-55
Power, 1-45
connection
USA, 1-45
On/Off Standby, 1-50
switch, location, 1-50
power
power up sequence, 1-49
shut down, 1-51
prescription device, caution, 1-6
presets, changing
Connectivity, 3-29
presets, overview, 3-2
Probe handling and infection control, 5-10
Probes
connecting, 1-54
probes
cable handling, 1-56, 5-2
care and maintenance, 5-4
cleaning, 5-11
coupling gels
coupling gels, probes, 5-15, 5-17
disconnecting, 1-56
disinfecting, 5-13
environmental requirements, 5-5
ergonomics, 5-2
labeling, 5-3
planned maintenance, 5-18