GE PACSystems RX3i - Page 40

show config
2-24 PACSystems* RX3iPROFINET Controller Command Line Interface Manual – July 2011 GFK-2572
2
Displaying only the PNC deviceName
Screen Display
device-name> show config deviceName
Src Parameter Parameter Value
---- ---------------- --------------------------------------------------
PME Device Name device-name
device-name>
Displaying only the PNC IP Parameters
Screen Display
device-name> show config ip
Src Parameter Parameter Value
---- ---------------- --------------------------------------------------
PME IP Address 10.10.0.2
PME Subnet Mask 255.255.255.0
PME Default Gateway 0.0.0.0
device-name>
Displaying only the PNC Redundant Media Settings
Screen Display
device-name> show config rdnMedia
Src Parameter Parameter Value
---- ---------------- --------------------------------------------------
PME Role Client
PME Ring Port 1 1
PME Ring Port 2 2
PME Test Interval 20 ms
PME Monitor Count 3
device-name>