GE PACSystems RX3i - Page 62

show node
2-46 PACSystems* RX3iPROFINET Controller Command Line Interface Manual – July 2011 GFK-2572
2
Displaying Identification and Physical Module Information
Screen Display
device-name> show node all
01-JAN-2000 05:44:17.0000
<<< Node Info >>>
Device Type: PROFINET Controller
Catalog Number: IC695PNC001
Serial Number: A123456
Date Code: 11-JUN-2011
Revision Information:
Primary FW: 1.00 (04D1)
Boot FW: 1.00 (01D1)
FPGA: 0.33 (46A1)
BIOS: C305D013 (23-JUL-2010)
PNIO Stack: 2.1.6.1
(c) 2008-2011 GE Intelligent Platforms, Inc. All rights reserved.
<<< Node ID >>>
Device Name: device-name
IP Address: 10.10.0.10
Subnet Mask: 255.255.255.0
Default Gateway: 0.0.0.0
<<< Node Status >>>
Module Status: OK
Config Source: Programmer
Restart Reason: Power Cycle
device-name>