om 5184516-100 Rev. 5 5-53
3-2-7 Back Up
When Back Up is selected a pop–up window appears The pop–up window allows
the user to back up the protocol database and the system configuration data.
ILLUSTRATION 5-53
BACK UP
The protocol database and the system configuration data is backed up onto a sin-
gle CD.
When the user selects “OK”, the Back Up begins.
Before the Back Up begins a check of the available space on the CD media is
done to verify that the database will fit on the CD.
NOTE: If an error is detected during the backup process, an error is generated and
logged in the system error log indicating the database backup process failed.
3-2-8 System Configuration Changes
Before the system configuration is changed, the protocol database must be
backed up onto a CD.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
