om 5184516-100 Rev. 5 9-2
SECTION 2
PARTS OF THE EQUIPMENT
The main parts of the SG80/120 are detailed in ILLUSTRATION 9-2.
ILLUSTRATION 9-2
2-1 Column Assembly
The column assembly includes the next main parts:
• Bucky support assembly: joins the column assembly to the bucky assembly
means of the vertical carriage that moves along the guide on the column.
Includes the vertical lock handle to control the vertical movement of the bucky
assembly.
• Covers: give the final appearance to the equipment.
• Counterweights: permit to counterbalance the bucky assembly to enable it
can be moved smoothly along the vertical direction.
• Column Stand: it is the main part of the column assembly, It is fixed to the
floor and is in charge to hold all the elements.
• Main cabling and electronic devices: in the column assembly are located the
equipment cables and electronic boards.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
Need help?
General
