om 5184516-100 Rev. 5 7-37
4-2Fluoro Exposures
After selecting protocol:
1. Set collimator blades manually to desired opening.
2. Press any of the four fluoro buttons, or the footswitch to initiate exposure.
4-2-1 Footswitch
The footswitch pedal is a single position footswitch. See ILLUSTRATION 7-19.
ILLUSTRATION 7-19
FOOTSWITCH BUTTONS
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
