om 5184516-100 Rev. 5 6-36
1. Enter the specific criteria for conducting the query in the “Study Information”
area of the screen.
Accession #: Use this field to query the patient records based on accession #
or work order # (a unique # for each instance).
Patient ID#: Use this field to query for a specific patient id # or a series of
patient ID #’s (example= 2* for those patient files beginning with the #2).
Patient Name: Use any of these fields to narrow or broaden the query by
patient name. Use of the wild character (*) is allowed. (Example: Last Name =
Smith, First Name = Rob*. This will return all patients with a last name of
“Smith” and a first name including “Rob” such as “Rob, Robert, or Roberto”.)
ILLUSTRATION 6-23
WORKLIST MANUAL QUERY
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
