om 5184516-100 Rev. 5 D-2
1-4 How to recognize when this mode is selected
When Flouroscopy mode is selected:
• X-ray tube 1 is selected (under table x-ray tube)
• The IDD console appears as follows
• The IUI screen will display record factors as well as fluoro factors. (The lower
portion of the screen is dedicated to fluoro factors.)
• The “Digital” button on the IUI will be selected.
• Any mode that uses the Flouroscopy tube (tube 1) will display the fluoro “eye”
icon on both the IUI and IDD wnen selected/engaged:
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
