2026265-075C Solar 8000M/i patient monitor 5-31
Troubleshooting: Get error logs
NOTE
If you are unsure of the firewall/networking services on your PC,
contact your local IT administrator for details. Windows 2000 and XP
PCs allow you to send a list of services to your IT administrator.
Set up a log folder and get logs
NOTE
Use the List or Details view on your PC when starting the
netUpdate.exe application. Do not use the Thumbnail view.
Always run the netUpdate.exe application from the CD-ROM
directory. Do not run the application from any other directory.
1. Make sure the patient monitor is in monitoring mode.
2. Insert the CD-ROM into the CD-ROM drive.
3. Double-click My Computer.
4. Create a folder for the log files in the root directory. Filename can not
have spaces. (e.g. C:\logs)
5. Return to My Computer and double-click the CD-ROM drive.
6. Select dnld > code > netUpdate.exe.
7. In the netUpdate window, select the patient monitor name or IP
address from the device list. Click Refresh until the IP address or
patient monitor name displays.
8. Click Get Log or Get All Logs.
939A
To Next Page
Loading...
